01
Telemetry
Temperature, clocks, fans and voltage per component — CPU, GPU, motherboard, storage, battery, network and PSU —, read straight from the board’s sensors, not estimated from a model.
Hardware & Performance
Measure first.
Then have an opinion.
Temperature, clocks, fans, battery, network adapter, power supply. Real network latency and measured frame time, not estimated.
Example interface readouts — in the app these numbers come from your machine's sensors.
61°C
CPU
30–95 °C
67°C
GPU
30–95 °C
8.3ms
FRAMETIME
0–33 ms
14ms
REAL PING
0–120 ms
0.5ms
TIMER
0–15.6 ms
120
SERVICES ON FILE
full catalogue
None of the values above is a measurement of your machine: they are interface examples. The app reads your hardware's sensors, and deep reading switches itself off in the presence of kernel anti-cheat.
Hardware & Telemetry
The tools
02
Safe overclocking
Power limit through the card's own driver, reversible, with a thermal guard. Voltage is out of scope, and video memory overclock is never applied automatically — GDDR corrects errors silently, so the symptom would be lost FPS with no error anywhere.
03
Measurement
Timer resolution, DPC latency, real frame time, 1% low and 0.1% low during a match. This is the instrument that separates a gain from a feeling, and it is the numeric proof you measure on your machine, not ours.
04
Advisor
Scans the machine and flags what is misconfigured: what a click fixes, and what only the BIOS fixes. Software cannot write firmware safely, so here it guides instead of acting.
Backing off from anti-cheat
Deep reading uses a sensor driver that kernel-level anti-cheat may find suspicious.
- On detecting kernel anti-cheat, the app switches that reading off by itself. You do not have to remember anything.
- The decision has debounce and cooldown: an intermittently failing read must not make the driver load and unload in a loop, that caused DPC spikes, and the cure became the disease.
- No third-party binary is loaded without its signature checked. That is about the components the app uses: our own installer does not have a code-signing certificate yet, and the download page explains that before you install.
That back-off came out of a mistake of ours. The list of what we already removed explains each case.
Measure your machine
The whole diagnostic side is free: dashboard, disk analysis, advisor and before/after comparison.